 Fil-Tec Bobbin Central  Glisten Metallic Thread
Properties
• Used for commercial embroidery, domestic sewing machines, and silk weaving.
• Constructed with Rayon core yarn covered w/ metallic film.
• 150 denier/2 ply
• Sews well up to 850 rpm. Much higher than most Metallic threads!
• 730 yds/spool
Composition
• Rayon core yarn and Aluminum or pure Silver film.
Tips for Embroidering with Glisten Metallic Thread
• Make sure that the design you’re going to use has been punched with metallic thread. This will likely reduce thread breaks.
• Do not use Glisten for small lettering.
• Reduce and keep tensions loose.
• Use needles with a large eye in order for the thread to pass through the needle eye easily. Sizes such as 75/11 & 90/14 are generally recommended.
• Use new needles when possible.
• Use soft and pliable backings. Metallic threads typically have a difficult time getting through hard or stiff backings.
• Burrs or rough spots on the needle will result in more thread breaks.
• Slow the machine speed down when embroidering with Glisten. |
0 items - Total: $0.00 -
Login -
Create An Account -
Checkout
